Installation Guides
Dri-Cote / Top-Cote MSDs
Job Safety
Hinges
Murphy Wall Beds
Rolling Doors
See All Guides
Categories
Workstation Brackets
Workstation Brackets
Shelf Brackets & Shelf Supports
Shelf brackets hold up shelves and countertops from below or behind; shelf supports, also called shelf pins or clips, hold adjustable shelves inside cabinets. CSH carries brackets and supports from Knape & Vogt, Sugatsune, U.S. Futaba, FastCap, Deltana and CSH, from small shelf pins to heavy countertop and workstation brackets.
Shop by type
- Shelf supports and shelf pins, like the best-selling shelf support pin
- Shelf standards for adjustable wall and cabinet shelving
- L-brackets and specialty brackets
- Countertop brackets for overhangs and bar tops, and workstation brackets for desks
- Glass and mirror mounting, including the glass panel retainer
- Drawer front mounting brackets and panel fasteners and clips
Choosing a shelf bracket
Match the bracket to the load and the overhang: countertop and workstation brackets are built for heavy, deep surfaces, while L-brackets suit lighter shelves. For adjustable cabinet shelves, measure the hole diameter (commonly 5 mm or 1/4") before you buy shelf pins. The Kreg shelf pin jig makes drilling rows of holes easy.
Questions
What size shelf pins do I need?
Measure the holes in your cabinet. Most are 5 mm or 1/4"; pick pins made for that hole size.
How far apart should shelf brackets be?
Space them closer for heavy loads and long shelves, and screw into studs or solid backing whenever you can.
What bracket do I need for a countertop overhang?
Use a countertop bracket rated for the overhang depth and the weight on top.
Viewing 343 Results
Sort Featured
-
Glass Panel Retainer -
Fast Cap Speed Brace -
Workstation Bracket -
Speed Brace Heavy Duty -
Plastic Shelf Standards -
Shelf Support Pin -
Shelf Support Bracket -
Work Station Bracket -
L-Bracket -
Speed Brace -
Angle Bracket 2-1/4" With 1-1/4" Sides -16 Gauge Steel -
Glass Retaining Bracket Statutory Bronze, 1,000/Box Includes mounting screw -
Mirror Clip -
Offset Panel Clip -
L-Bracket 2"x 2"x 5/8" With Countersunk Holes -
Smart Cleat 48" -
Mending Plate -
33" Floating Speedbrace (Single) -
Shelf Standards -
6" Keyhole Bracket 16 Gauge steel -
Panel Clip -
Shelf Lockdown -
Grommet For Shelf Support -
Shelf Standard Clips -
Panel Fasteners -
Shelf Support, Clear, 5 mm Shank Size -
Shelf Standards, Silver 48" -
Plastic Corner Block 2-1/2" x 2-1/2" x 3/4" With Tabs, White -
Shelf Standard, Clips Silver -
Shelf Support, Nickel, 5 mm Shank Size, Zinc Die-Cast with Suction Cup -
Shelf Support With Vinyl Cover -
U-Bracket 42mm High x 30mm Deep M8 Thread -
Drawer Front Adjuster, 20 mm Diameter, 11mm Depth, White -
Corner Brace For Cabinets 1-1/4" x 1-1/4" x 3/4" White, Multiples of 100 -
SpeedBrace Anchor for Metal Stud, Multiples of 10 -
Fast Cap Kolbe Korner
