In stock

Interior Hidden Fasteners for Profile Boards with 10.5mm Groove Depth, 100 Pieces


Tongue and groove boards are used in many ways for interior construction. This simple fastening system allows the tongue and groove boards to fulfill their intended tasks, without displaying exposed fasteners or nails. Instead of leaving nails exposed and susceptible to rust and wear, or tediously covering every nail hole with wood filler, use these hidden fasteners! 

Installation is simple! Push the hidden fastener claw over the groove cheek and press in retaining prongs. Then, secure the fastener with the enclosed 3mm x 17mm screws. We recommend using a pozidriv Z1 or PZ1 bit.

- 100 10.5mm x 6mm Tongue and Groove Clips
- 100 3mm x 17mm Phillips Screws

- For safe installation of profile (tongue and groove) boards with a groove depth of 10.5mm
- For interior use
- Yellow-chromate coated steel
- Dimensions: 10.5mm hook depth x 6mm hook height
- Tested According to DIN 18168 standards
- Compatible with Home Depot 1-in. (23/32") T&G boards, and Menards 1" (23/32") T&G Carsiding WP4/116

- 1 box = 50 square feet when used in combination with 6" T&G boards and a 16" stud spacing

Video tutorial on how to install shiplap using hidden fasteners
How to Install Shiplap Using Hidden Fasteners
Interior Hidden Fasteners for Tongue and Groove Boards
More Information
SKU FBS.4115-05-1
Brand Franmar
UPC 841572132474
Sold as: BOX
Type Fastener
Manufacturer's Part Number 4115-05-01
Depth 10.5mm
Projection 6mm